|
Product Details:
|
| Material: | Ferrite Powder And CPE Rubber | Color: | Brown Or Brown Black |
|---|---|---|---|
| Coating: | UV Coating Or PVC Or PET Coating | Length: | From 1mm To 1000mm Or A Roll |
| Thickness: | From 0.1mm To 10mm | Surface Magnetic Force: | From 300GS To1200GS |
| High Light: | Rubber Coated Ferrite Ring Magnets,Ferrite Ring Magnets Waterproof,ISO Small ferrite magnet ring |
||
ISO 9000 PVC Coating 300GS To1200GS Rubber Ferrite Magnets
Rubber Ferrite Magnets
Rubber ferrite is a magnetic material mixed with rubber and ferrite magnetic powder to protect against scratches, impacts, moisture, and other harsh environments. At the same time, because of its low price of raw materials and good anti-rust characteristics, it is widely used in daily households, bathrooms, fan motors.
These magnets can withstand operating temperatures up to 90°C and long-term operation in humid environments, and offer soft bending resistance.
Product grade list
| Product standards Of Flexible Ferrite Magnet | ||||||||||
| Version | 2020-02-v03 | |||||||||
| 1-1 | ||||||||||
| Magnetic Properties | ||||||||||
| Material Type | MGT-RF1 | MGT-RF1.6 | MGT-RF2 | |||||||
| Br | Gs | 1600±200 | 2400±200 | 3000±500 | ||||||
| mT | 160±20 | 240±20 | 300±50 | |||||||
| Hcb | Oe | 1300±200 | 1750±200 | 2000±500 | ||||||
| kA/m | 100±20 | 150±20 | 159±40 | |||||||
| Hcj | Oe | 1600±200 | 2600±200 | 3000±1000 | ||||||
| kA/m | 130±20 | 210±30 | 239±80 | |||||||
| (BH)max | MGOe | 0.7±0.5 | 1.5±0.5 | 2±0.5 | ||||||
| kJ/m3 | 5±1 | 12±1 | 16±4 | |||||||
| Flux Irreversible Loss | % | ＜5 | ＜5 | ＜5 | ||||||
| (αBr) | %/℃ | -0.11 | -0.11 | -0.11 | ||||||
| Temperature Coefficient of Br | ||||||||||
| Max Operating Temp | ℃ | 85 | 85 | 85 | ||||||
| Physical Properties | ||||||||||
| Density | g/cm3 | 3.6-4.0 | 3.8-4.0 | 3.8-4.2 | ||||||
| Hardess | Shore D | 30-70 | ||||||||
| Tensile Strength | Mpa | >3.5 | ||||||||
| Elongation | % | 20-90 | ||||||||
| Size Range | ||||||||||
| Thickness(mm) | Range | 0.2-0.3 | 0.4-1.0 | 1.1-2.0 | 2.1-3 | ≥3.1 | Remark:This data is only applicable to the general situation, and the specific product is determined according to the delivery specifications | |||
| Tolerance | ±0.03 | ±0.05 | ±0.07 | ±0.1 | ±0.15 | |||||
| Width (mm) | Range | 1-30 | 31-100 | 101-200 | 201-400 | 401-450 | ||||
| Tolerance | ±0.1 | ±0.15 | ±0.3 | ±0.5 | ±1 | |||||
| Length (mm) | Range | 1-30 | 31-100 | 101-200 | 201-400 | ≥401 | ||||
| Tolerance | ±0.1 | ±0.15 | ±0.3 | ±0.5 | 1-5 | |||||
| Technical information can be change without furture notice | ||||||||||
Classification of Ferrite Magnets
According to the different production processes, ferrite magnets can be divided into sintered ferrite and bonded ferrite. Among them, sintered ferrites can be divided into dry pressed ferrites and wet pressed ferrites, and bonded ferrites can be divided into extruded ferrite, pressed ferrite and injection molded ferrite.
Ferrite magnets can be divided into isotropic permanent magnets and anisotropic permanent magnets according to whether an external magnetic field is applied during molding. Isotropic sintered ferrite permanent magnets are weakly magnetic, but can be magnetized in different directions of the magnet. Anisotropic ferrite permanent magnets are very magnetic but can only be magnetized in the intended magnetization direction of the magnet.
Soft, flexible, twistable magnets made from bonded ferrite powder and synthetic rubber are also called rubber magnets.
application of Rubber Ferrite magnet
Cylinder sensor
Lifts sensor
Door and window stoppers
Mechanical fasteners
Fan Motor
Contact Person: Jack Cui
Tel: 18653221706
